our solutions by application
Concrete Mixers
1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).
2. Apply one coat of EP-Guard epoxy primer 1500 Series for a minimal dry film thickness of 2 mils.
3. Topcoat with Glass-Guard polyurethane 2800 Series for a minimal dry film thickness of 3 mils.
4. For an additional super protection, apply one coat of clear one component acid resistant polyurethane MC-4250. The procedure for adequate application of the MC-4250 : 1- Apply a very thin mist and let set for 30 minutes. 2- Then apply one medium wet coat.