our solutions by application
Potable Water Tanks | Exterior
1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).
2. Apply two coats of anti-corrosion primer MC-4390 to obtain a minimal dry film thickness of 8 mils.
3. Topcoat with Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 3 mils.
Potable Water Tanks | Interior
1.Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP5 (white metal blast).
2. Apply one coat of EP-Guard white epoxy primer 1553 to obtain a dry film thickness of 3 mils.
3. Topcoat with EP-Guard grey epoxy primer 1552 to obtain a dry film thickness of 3 mils.