High Performance Paint Coating - Glass Shield

Potable water tanks

Exterior

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast)
2. Apply two coats of anti-corrosion primer MC-4390 to obtain a minimal dry film thickness of 8 mils.
3. Topcoat with Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 3 mils.

Interior

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP5 (white metal blast).
2. Apply one coat of EP-Guard white epoxy primer 1553 to obtain a dry film thickness of 3 mils.
3. Topcoat with EP-Guard grey epoxy primer 1552 to obtain a dry film thickness of 3 mils.

 

Chemical tanks

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).
2. Apply two coats of one component anti-corrosion primer MC-4390 to obtain a dry film thickness of 6 mils.
3. Topcoat with Glass-Guard polyurethane 2800 Series for a dry film thickness of 2 mils.

 

Roofs

1. Surface to be painted must be free of any contaminants such as grease, oil, wax and poorly adhered paint. If the floor is already painted, we recommend a blastrack in order to promote the best adhesion and therefore ensure excellent performance of Glass Shield products.
2. Apply with a brush or roller two generous coats of two component EP-Guard 1500 Series allowing at least 8 hours between each coat (the first coat must be diluted 25% with thinner 162-11 and the second coat must be diluted 10%).
3. For an additional super protection, topcoat with one component clear polyurethane MC4390 or MC 46704. The procedure for adequate application : 1- Apply a very thin mist and let it set for 30 minutes. 2- Then apply one medium wet coat.

  

Steel

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).
2. Apply one coat of epoxy primer MC4390 ou MC 46704 Series for a minimal dry film thickness of 3 mils.
3. Topcoat with Glass-Guard polyurethane 2800 Series for a minimal dry film thickness of 3 mils.

  

Security posts & bollards

Steel

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).
2. Apply one coat of EP-Guard epoxy primer 1500 Series for a minimal dry film thickness of 3 mils.
3. Topcoat with Glass-Guard polyurethane 2800 Series for a minimal dry film thickness of 3 mils.

 

Fiberglass

1. All fiberglass parts must be dull (paper grit #320 or finer).
2. Apply one coat of EP-Guard epoxy primer 1500 Series for a minimal dry film thickness of 3 mils.
3. Apply two coats of Glass-Guard polyurethane 2800 Series for a minimal dry film thickness of 2 mils.

 

Exterior and interior walls

1. Surface to be painted must be free of any contaminants such as grease, oil, wax and poorly adhered paint. If the floor is already painted, we recommend a blastrack in order to promote the best adhesion and therefore ensure excellent performance of Glass Shield products.
2. Apply with a brush or roller two generous coats of two component EP-Guard 1500 Series allowing at least 8 hours between each coat (the first coat must be diluted 25% with thinner 162-11 and the second coat must be diluted 10%).
3. For an additional super protection, topcoat with one component clear polyurethane MC-4250. The procedure for adequate application of the MC-4250 : 1- Apply a very thin mist and let it set for 30 minutes. 2- Then apply one medium wet coat.

 

Concrete floors

1. Surface to be painted must be free of any contaminants such as grease, oil, wax and poorly adhered paint. If the floor is already painted, we recommend a blastrack in order to promote the best adhesion and therefore ensure excellent performance of Glass Shield products.
2. Apply with a brush or roller two generous coats of two component EP-Guard 1500 Series allowing at least 8 hours between each coat (the first coat must be diluted 25% with thinner 162-11 and the second coat must be diluted 10%).
3. or an additional super protection, topcoat with one component clear polyurethane MC-4250. The procedure for adequate application of the MC-4250 : 1- Apply a very thin mist and let it set for 30 minutes. 2- Then apply one medium wet coat.

 

Parking

1. Surface to be painted must be free of any contaminants such as grease, oil, wax and poorly adhered paint. If the floor is already painted, we recommend a blastrack in order to promote the best adhesion and therefore ensure excellent performance of Glass Shield products.
2. Apply with a brush or roller two generous coats of two component EP-Guard 1500 Series allowing at least 8 hours between each coat (the first coat must be diluted 25% with thinner 162-11 and the second coat must be diluted 10%).
3. or an additional super protection, topcoat with one component clear polyurethane MC-4250. The procedure for adequate application of the MC-4250 : 1- Apply a very thin mist and let it set for 30 minutes. 2- Then apply one medium wet coat.

 

Various containers

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).
2. Apply one coat of EP-Guard epoxy primer 1500 Series for a minimal dry film thickness of 3 mils.
3. Topcoat with Glass-Guard polyurethane 2800 Series for a minimal dry film thickness of 3 mils.