our solutions by substrate | aluminium

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply a light coat of vinyl wash primer Vinyl-Shield 7342 to obtain a dry film thickness of 0.5 mils max. Let dry for 15 minutes.

3. Apply one coat of EP-Guard epoxy primer 1500 Series to obtain a dry film thickness of 2 mils. Let dry for 3 hours.

4. Topcoat with Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 2 to 3 mils.

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply one coat of epoxy primer Alu-shield to obtain a dry film thickness of 2 mils. Let dry for 3 hours.

3. Topcoat with Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 2 to 3 mils.

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply two coats of anti-corrosion primer MC-4390 to obtain a dry film thickness of 5 mils.

3. Apply one coat of EP-Guard epoxy primer 1500 Series to obtain a dry film thickness of 2 mils.

4. Topcoat with Glass-Guard polyurethane 2800 Series to obtain a minimal dry film thickness of 3 mils.

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply one coat of one component anti-corrosion primer MC-4390 to obtain a dry film thickness of 3 mils.

3. Apply one coat of EP-Guard 1500 Series to obtain a minimal dry film thickness of 2 mils.

4. Topcoat with Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 2 mils.

1. Condition new aluminum surfaces with AGA-2000 and let product stand for 15 minutes. Rinse with water and wipe with a lint free cloth.

2. Apply a light coat of vinyl wash primer Vinyl-Shield 7342 to obtain a maximum dry film thickness of 0.5 mils. Let dry for 15 minutes.

3. Apply one coat of EP-Guard epoxy primer 1500 Series to obtain a dry film thickness of 2 mils. Let dry 3 hours.

4. Topcoat with two coats of Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 2 to 3 mils.

1. Condition new aluminum surfaces with AGA-2000 and let product stand for 15 minutes. Rinse with water and wipe with a lint free cloth.

2. Apply one coat of epoxy primer ALU-SHIELD to obtain a dry film thickness of 2 mils. Let dry 3 hours.

3. Topcoat with two coats of Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 2 to 3 mils.