our solutions by application

1. Surface to be painted must be free of any contaminants such as grease, oil, wax and poorly adhered paint. If the floor is already painted, we recommend a blastrack in order to promote the best adhesion and therefore ensure excellent performance of Glass Shield products.

2. Apply with a brush or roller two generous coats of two component EP-Guard 1500 Series allowing at least 8 hours between each coat (the first coat must be diluted 25% with thinner 162-11 and the second coat must be diluted 10%).

3. For an additional super protection, topcoat with one component clear polyurethane MC-4250. The procedure for adequate application of the MC-4250 : 1- Apply a very thin mist and let it set for 30 minutes. 2- Then apply one medium wet coat.