our solutions by industry | maintenance

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply one coat of EP-Guard epoxy primer 1500 Series for a minimal dry film thickness of 3 mils.

3. Topcoat with Glass-Guard polyurethane 2800 Series for a minimal dry film thickness of 3 mils.

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply one coat of EP-Guard epoxy primer 1500 Series for a minimal dry film thickness of 2 mils.

3. Topcoat with Glass-Guard polyurethane 2800 Series for a minimal dry film thickness of 3 mils.

4. For an additional super protection, apply one coat of clear one component acid resistant polyurethane MC-4250. The procedure for adequate application of the MC-4250 : 1- Apply a very thin mist and let set for 30 minutes. 2- Then apply one medium wet coat.

Concrete mixer truck refurbishing program

Ready mix truck refinishing industry

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply two coats of anti-corrosion primer MC-4390 for a minimal dry film thickness of 5 mils (interior and exterior).

3. Topcoat the interior of the box only, with two coats of one component Amber Shield MC-4509.

4. Topcoat the exterior with two coats of Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 3 mils minimum.

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply one coat of EP-Guard 1500 Series for a dry film thickness of 3 mils.

3. Topcoat with Glass-Guard polyurethane 2800 Series for a dry film thickness of 3 mils.

1. All galvanized metal must be treated with AGA-2000 metal conditioner. Let product stand for 15 minutes. Rinse with water and wipe surface with a lint free cloth.

2. Apply one coat of galvanized metal primer 29355 to obtain a dry film thickness of 1.5 mils. Wait 30 minutes.

3. Topcoat with Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 3 mils.

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply two coats of anti-corrosion primer MC-4390 to obtain a dry film thickness of 5 mils.

3. Apply one coat of EP-Guard epoxy primer 1500 Series to obtain a dry film thickness of 2 mils.

4. Topcoat with Glass-Guard polyurethane 2800 Series to obtain a minimal dry film thickness of 3 mils.

1. Sandblast to obtain a surface profile of 1 to 1.5 mils complying with the standard SSPC-SP6 (commercial blast).

2. Apply one coat of one component anti-corrosion primer MC-4390 to obtain a dry film thickness of 3 mils.

3. Apply one coat of EP-Guard 1500 Series to obtain a minimal dry film thickness of 2 mils.

4. Topcoat with Glass-Guard polyurethane 2800 Series to obtain a dry film thickness of 2 mils.