our solutions by substrate | concrete
1. Surface to be painted must be free of any contaminants such as grease, oil, wax and poorly adhered paint. If the floor is already painted, we recommend a blastrack in order to promote the best adhesion and therefore ensure excellent performance of Glass Shield products.
2. Apply with a brush or roller two generous coats of two component EP-Guard 1500 Series allowing at least 8 hours between each coat (the first coat must be diluted 25% with thinner 162-11 and the second coat must be diluted 10%).
3. For an additional super protection, topcoat with one component clear polyurethane MC-4250. The procedure for adequate application of the MC-4250 : 1- Apply a very thin mist and let it set for 30 minutes. 2- Then apply one medium wet coat.
Return to our solutions by substrate